GSP NZD ISO Flush - Isocyanates Cleaner & Neutralizer - 5gal (18,9l) pail

Part-#: GSP-NIF-5
Size: 5 gallon (18,9l)
Original GSP Product

GSP NZD ISO Flush is highly effective at removing excess liquid Isocyanate from processing equipment such as heated hoses, feed lines, feed tanks, mixing and metering equipment.
It can also effectively break down and eliminate partially crystallized Isocyanate residue and build-up from equipment and parts. Plus, there's no need to pre-flush Part (A) with other fluids before using this solution.

NZD ISO FLUSH effectively removes:

• Liquid & semi-hardened Isocyanate Part (A), Polyol Part (B), cured Polyurethane Reactive Hot Melt Adhesives from Roll Coating Equipment and Dispensing Equipment, as well as many other industrial adhesives
• Industrial Resins such as Polyester, Vinylester, Epoxy, and Pigmented Gel Coats, as well as, Fiberglass and Resin Mixtures
• Coatings such as High & Low Solid Aliphatic, Waterborne Epoxy Primers, Polyurethane, Acrylic, Varnishes, and Alkyl Enamel

Features & Benefits

• High Resin/Polymer loading
• Replaces solvents such as NMP, Acetone, MEK, Methylene Chloride
• Low rate of evaporation

MAXIMUM FLUSHING TIME IS (4) HOURS. DO NOT LEAVE NZD ISO FLUSH inside the system OVERNIGHT!

Flushing

Use FULL STRENGTH at room temperature. Do Not Heat this product.

• Flush out the entire ISO (A) Line throughout the system by placing the Transfer Pump inside a pail containing 2 - 3 gallons of NZD ISO FLUSH Isocyanates Cleaner & Neutralizer.
• Allow the transfer pump to pass the solvent throughout the system by recirculating up to a Maxim (4) hours or until it runs clear.
• Push the spent solvent and ISO mixture into a waste bucket. Do Not Reuse!
• Once the system is free of Isocyanates, you are now ready to purge the system with a few quarts of Isocyanates and ready to spray away.
• TO STORE your equipment: Add SurfaLube Equipment Storage Fluid to the lines. Your equipment is ready for storage.

*PURCRAFT is proud to be an authorized GSP distributor.
All mentioned product and company names, trademarks, registered trademarks or logos are the property of their respective owners and are used for identification purposes and for the determination of product compatibility only.